The Hughes & Kettner User Forum

Would you like to react to this message? Create an account in a few clicks or log in to continue.
The Hughes & Kettner User Forum

The Unofficial guitar amp and cabinets forum for users of Hughes and Kettner products. We are not affiliated with Hughes and Kettner!!


2 posters

    Tubemeister 36 1 watt problem

    Zaknafein76
    Zaknafein76


    Posts : 3
    Join date : 2017-09-26

    Tubemeister 36 1 watt problem Empty Tubemeister 36 1 watt problem

    Post by Zaknafein76 Tue Sep 26, 2017 12:00 pm

    Hi there guys!

    I've just bought a tubemeister 36. I've start playing at home switching the amp on 1 watt. Everything was ok...but after 5 minutes the volume suddenly become impossibly loud! I've checked and the Yellow light on 1 watt is normally on.

    Now i'ts impossible to use the amp at 1 or 5 watt...the red lights behind the amp are correctly displayed...no lights when i use 36 and two red lights in switch mode...

    And apparently the master knob of lead and crunch has no effect...

    What happened?

    Thanks!
    bordonbert
    bordonbert


    Posts : 1772
    Join date : 2015-01-28
    Age : 72
    Location : Southern England

    Tubemeister 36 1 watt problem Empty Re: Tubemeister 36 1 watt problem

    Post by bordonbert Fri Oct 13, 2017 8:19 pm

    Have you tried doing a factory reset?  It doesn't sound lik eit will do much to me but it is the starting point I would say.
    H&K TM36 Manual wrote:To reset the amp to the factory default settings, press and hold the MIDI LEARN and FX LOOP On buttons simultaneously for five seconds until the MIDI LEARN button lights up. After you release MIDI LEARN button, it will flash once to confirm that the reset has been executed properly.


    _________________
    Newcastle Brown, can sure smack you down
    You take a greasy wh*re, and a rollin' dance floor
    You know you're jailhouse bound!

    Rock On Humble Pie

      Current date/time is Thu Mar 28, 2024 11:52 am