The Hughes & Kettner User Forum

Would you like to react to this message? Create an account in a few clicks or log in to continue.
The Hughes & Kettner User Forum

The Unofficial guitar amp and cabinets forum for users of Hughes and Kettner products. We are not affiliated with Hughes and Kettner!!


2 posters

    Resonance...

    dacop1313
    dacop1313


    Posts : 3
    Join date : 2020-02-21

    Resonance... Empty Resonance...

    Post by dacop1313 Sun Feb 23, 2020 11:50 pm

    Anyone know why the Resonance control will not save or indicate its "Store" location on the amp itself? When I turn the control it only seems to kick in hard at 10 (full) only. Sometimes the Store LED will light up randomly several times while going from low to full, but no real response util its at full.

    VanMaco
    VanMaco


    Posts : 4
    Join date : 2020-01-01

    Resonance... Empty Re: Resonance...

    Post by VanMaco Sat Feb 29, 2020 2:31 pm

    Have you programmed that resonance function so it can be stored in patches? From the manual:
    Resonance and Presence can be programmed into every preset, or these controls can be used as a master control that is not changed by switching presets, like the Master Volume control. If you want to use Resonance and Presence as a global control, press Store and FX-Access simultaneously for three seconds until the Store LED starts flashing. Now the FX Access LED indicates if you are in Global Mode (flashing) or in Preset Mode (not flashing). You can change the mode with the FX Access button: if it does not flash (Preset Mode), press it to change to Global Mode. If it flashes (Global Mode), press it to change to Preset Mode. To store your changes press Store for three seconds until it stops flashing.
    You’ll find a quick-start guide on the bottom of the GrandMeister Deluxe 40.

      Current date/time is Sun May 19, 2024 11:44 pm