Home
Just bought a Hughes and Kettner Black Spirit 200 and I can’t figure out to to turn off the delay.
New proud owner as of a few hours ago.
New proud owner as of a few hours ago.
3 posters
How to turn off delay
Guitar69Freak- Posts : 1
Join date : 2021-01-20
bordonbert- Posts : 1790
Join date : 2015-01-28
Age : 72
Location : Southern England
Hi Guitar69Freak, hope the amp is living up to your expectations.
The usual way to access the Delay setting is to press the FX Access button which should start to flash showing you are in FX mode. You then simply turn the Delay Level fully down. Finally press the FX Access button again to exit FX mode back into standard play mode. Then Hopefully, whaddya know, no more delay.
Is this what you have tried?
The usual way to access the Delay setting is to press the FX Access button which should start to flash showing you are in FX mode. You then simply turn the Delay Level fully down. Finally press the FX Access button again to exit FX mode back into standard play mode. Then Hopefully, whaddya know, no more delay.
Is this what you have tried?
_________________
Newcastle Brown, can sure smack you down
You take a greasy wh*re, and a rollin' dance floor
You know you're jailhouse bound!
Rock On Humble Pie
Bobe89- Posts : 3
Join date : 2022-02-23
If you use the app, delay can also be disengaged with the little blue dot next to the delay section.
There is also a way to allocate this delay on/off button to one of the external footswitch port on the midi controler if you happen to own one of those. (Highly recommended!) How exactly, I don't remember but I set mine up this way.
There is also a way to allocate this delay on/off button to one of the external footswitch port on the midi controler if you happen to own one of those. (Highly recommended!) How exactly, I don't remember but I set mine up this way.
bordonbert likes this post
|
|
|